Right click or press ESC to exit pad placement mode.Ĭreate the irregular pad shape using a solid region: The pad dialog will be displayed, choose top layer for Layer under Properties section. Open up a PCB library, create a new component footprint and from the menu select Place » Pad.Īs the pad is floating on the cursor before placement press the Tab key to define the pad properties.The following is an example of creating an irregular pad using a pad and a solid region: However, building the irregular pad shape from other objects such as fills, solid region(s), line (tracks) or arcs would require solder and paste masks to be defined manually by placement of suitably enlarged or contracted objects on the solder mask and paste mask layers. If Pad objects are used to build an irregular pad shape then the matching irregular mask shape will be generated correctly. HOWTO Create a component footprint with an irregular pad shapesĬomponent footprints with irregular pad shapes can be created using any of the design objects available in the library editor, but be aware that the software automatically creates solder and paste masks based on the shape of the pad objects.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |